I. Lifting Method

Release Date:

2026-06-04

Insert a steel bar of appropriate diameter—whose load‑bearing capacity exceeds 10 tonnes—through the central hole of the belt roll. Securely connect the wire ropes (or chains) at both ends of the lifting device’s suspension beam to the exposed portions of the steel bar, as shown in the figure. The distance between the connection points of the wire ropes on either end of the suspension beam should be greater than the belt width plus the packaging roller width, to prevent the belt and its ear‑type adhesive from being crushed or abraded by the wire ropes (or chains).

Insert a steel bar of appropriate diameter—whose load‑carrying capacity exceeds 10 tonnes—through the central hole of the belt roll. Securely attach the wire ropes (or chains) at both ends of the lifting device’s suspension beam to the exposed portions of the steel bar, as shown in the figure. The distance between the attachment points of the wire ropes on either end of the suspension beam must be greater than the belt width plus the packaging roller width, to prevent the belt and its ear‑type adhesive from being crushed or abraded by the wire ropes (or chains).